Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Saint-Gobain Tygon Tubing, 1/8 in ID, 1/4 in OD, Clear
Saint-Gobain Tygon B-44-4X tubing is a clear, food-contact flexible tubing engineered for dairy, beverage, and dispensing applications. It features a smooth, non-porous bore that resists particulate entrapment and is compatible with common sanitary cleaners, providing reliable fluid transfer in food-processing systems.
- Clear, smooth, non-porous bore that resists particulate entrapment.
- Phthalate- and BPA-free formulation suitable for food contact.
- Inner diameter 1/8 in (3.18 mm), outer diameter 1/4 in (6.35 mm).
- Maximum working pressure 60 psi (4.1 bar) at 73°F (23°C).
- Maximum recommended operating temperature 165°F (74°C).
- Minimum bend radius 3/8 in (9.53 mm).
- Complies with FDA food additive regulations, NSF-51, NSF-61, 3-A, REACH, and EU food-contact regulations.
- Resistant to harsh alkaline cleaners and sanitizers.
Hach Company Replacement: TUBING, TYGON(R), 3/8" ID X 5/8" OD
Replacement Tygon Tubing, 3/8" interior diameter X 5/8" outside diameter for Xenosep SPE Systems Apparatus.
Accuflow Systems 374 TUBE 50FT,.188X.313X.062
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Norprene, 1/4"" ID x 1/2"" OD; 50 ft
This tubing is ideal for chemical, heat, ozone, and ultraviolet (UV) light resistance applications. Characteristics include nonconductive, heat-sealable, nonaging, nonoxidizing, with superior acid and alkali resistance. They are manufactured according to GMP. Temperature range is -75 to 275¿F (-60 to 135¿C). Can be sterilized with autoclave.
Microsolv Technology Corporation Tubing, PFA, 0.030" ID, 1/16" OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv PFA ( PerFlourAlkoxy ) low pressure tubing is very similar to Teflon but is less permeable, more transparent and performs better in high temperature and pressure. Higher temperature than FEP are possible. This tubing is used in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Also known as Teflon FEP.Do not use this tubing with heat over 260⁰C. Internal and Outer Dimensional Tolerance: +/- 0.10mm Color: Natural PFA, Transparent, slight light blue tint ID: 0.030" ( 0.75 mm ) Pressure rating: 1075 psi.
